Additional Info
Additional Info
| Country of Manufacture | |
|---|---|
| Crimping equipment Brands | Mecal |
| Type of press | Electromech |
| Miniapplicator | Mecal EVS |
| Page Layout | No layout updates |
Mating Connectors
this product has no mating connectors products
Required Components
this product has no mating Required components products
Accessories
this product has no accessories products
Description
Details
Technical Specifications
- ID: EVS
- Crimping height: 135,8mm (5,346
- Stroke: 40/30mm (1,575/1,18")
- Terminal Pitch: < 28 mm (<1,10")
- Terminal Thickness: Max 0,6mm (max 0,023")
- Wire Section: Max 6mm²
- Feeding System: Mechanical
- Weight: 3 (6,6))
- Dimension (mm): W144xH145,5xD190
- Dimension ("): W5,66"xH5,73"xD4,13"
- Option: Continuous regulating head / 0,01mm(0,00039") resolution / 2,7mm(0,106") range
Mini applicator for linked terminals, with thickness < 0.6mm, terminal pitch < 27mm, wire section between 0 and 6mm². Mechanical « side-feed » feeding system (no pneumatic version available) for linked terminals on a reel to be unrolled left to right.
Can be supplied either with a continuous or a fourpad regulating head. It is supplied with a non-resettable 7-digit cycle counter, and with both cams either for terminal feeding on upstroke or downstroke.
Can be fitted to any crimping press having a crimping height (measured from the miniapplicator mounting plate to the press « T » coupling when at Bottom Dead Center) of 135.8mm ± 0.02, and can be used in both manual (for bench-top press) and automatic (for cut and strip machine) configuration.
It is supplied with a complete technical documentation containing all the information needed to safely use and correctly maintain the equipment.
Upon request, a capability study (including a picture of a sectioned crimped terminal) can be performed.
- The anvil can be replaced without removing the applicator from the press, as the anvil is made in two parts – wire and insulation – it is possible to replace only the worn-out one
- The mini applicator base-plate is thicker, hence more rigid
- The mini applicator body allows the replacement of the crimpers without removing the ram from the applicator or the applicator from the press
- The pitch adjusting system as well as the centering of the terminal over the anvil are even more user friendly and clearly illustrated in the detailed technical documentation.
